Install guide

CalAmp | LenderOutlook Device Install Guide
Page 20 MBUD-0266v1.1
5.5 LMU-XXX INSTALLATION VERIFICATION
Installers should verify that the LMU-XXX GPS and communication functions are working properly before
departing the installation site. Installation is complete and successful when you have tested the device.
Using LenderOutlook’s mobile app, MobileInstall
TM
, you can install the vehicle in LenderOutlook and
verify device installation from your mobile device. MobileInstall can be downloaded from the Chrome
Play store and is free.
5.5.1 STATUS LEDS
The LMU-XXX is equipped with two status LEDs – one for GPS and one for Comm (wireless network
status). The LEDs use the following blink patterns to indicate service. Verify that the GPS receiver has
acquired satellite communication to obtain your GPS position by verifying the GPS status LED (Green).
Next, verify that the LMU-XXX has established a 2-way connection with the communication server via
the wireless network by checking the GSM/GPRS cellular status LED (Orange).
Orange LED Status
GSM/GPRS Cellular Communications
Green LED Status
GPS Communications
Blinking – LMU-XXX is powered, searching for wireless
signal
Blinking – GPS on, searching for satellite signal
Patterned Blinking – Signal acquired, LMU-XXX trying to
establish connection to communication server
Solid – 2-way communication link with the communication
server is established
Solid – GPS lock established