Install guide

CalAmp | LenderOutlook Device Install Guide
3.3 WIRING
3.3.1 LMU-3XX
The LMU-3XX has 4 22AWG leads for its power and I/O connections. These leads are mapped as follows:
Wire
Description
Usage
Black
Ground (-)
Required
Red
Power (+)
Required
White
Ignition “on” Input
Required for Starter Disable
Required for Payment Reminder
Buzzer
Required for use of Sleep Mode
Optional for basic location
Green
Output to Starter Relay
Required for Starter Disable
3.3.2 LMU-4XX
LMU-400 has an internal starter disable relay and an internal payment reminder buzzer. Two green
wires act as an interrupt between the starter ignition switch and the starter relay.
Wire
Description
Usage
Black
Ground (-)
Required
Red Power (+)
Required
White Ignition “ON” input
Required for Starter Disable
Required for Payment Reminder Buzzer
Optional for
basic location
Green 1
(either wire)
Input from Ignition to internal
Starter Relay (please see
guidelines on using the internal
and external starter disable)
Required for Starter Disable Function
Green 2
(either wire)
Output to internal Starter Relay
(please see guidelines on using
the internal and external starter
disable)
Required for Starter Disable Function
Brown
Output to external Starter Relay
when required (please see
guidelines on using the internal
and external starter disable)
Required for External Starter Disable relay accessory
MBUD-0266v1.3 Page 7