Install guide

CalAmp | LenderOutlook Device Install Guide
4.3 VISIBILITY OF DIAGNOSTIC LEDS
The LMU-XXX’s status LED lights provide valuable information about the device performance and
operation. When feasible, attempt to install the LMU-XXX in such a way that the lights are visible with
reasonable ease. If you observe poor performance, you may need to read the LEDs to troubleshoot the
issue. If you cannot resolve the issue, you will need to provide the LED information to the CalAmp
Customer Support Team.
Refer to Status LEDs
for detailed information on the light patterns and status.
4.4 PROTECTION FROM HEAT
Do not place the LMU-XXX in an unusually warm location, such as directly near heater vents, hot engine
components or direct sunlight.
Refer to Environmental Specifications
for the maximum temperature tolerated by the LMU-XXX.
4.5 CABLE LENGTH
The harness cable, which is provided for connecting to the LMU-XXX to the vehicle or other auxiliary
device, should be used at the length provided. Do not cut cables. Instead, coil and secure any excess
cable, making sure not to crimp or bend the cable.
Figure 2: Coil Excess Cable
Page 12 MBUD-0266v1.3