Install guide

CalAmp | LenderOutlook Device Install Guide
3. Secure the LMU-XXX OBD-II harness connector and the OBD-II connector together with tape to
prevent loose connections that may occur from normal vehicle operation vibration.
Figure 9: Plugged OBD-II Connectors and Taped Connectors
4. Re-mount the LMU-XXX OBD-II harness connector in the vehicle’s original location.
5. Important: The OBD-II port provides device power, but to obtain ignition condition, you must
connect the White Wire from the Standard Wiring Harness to True Ignition in the vehicle.
• Connect the White Wire from the Standard Wiring Harness to True Ignition in the vehicle. Verify that
the wire is powered only with the key in the engine on condition, not the ACC or radio key position.
Figure 10: Re-mounted OBD-II Port Connector
Page 18 MBUD-0266v1.3