Install guide

CalAmp | LenderOutlook Device Install Guide
7 CAT-720 INSTALLATION
Installation time can vary depending upon the installer’s experience and the asset design. The average
time for installation is approximately 60 minutes. A single individual can perform most installation
operations
To Install CAT-720:
1. Ensure mounting surface is level, rust and dirt free.
Figure 15: Example CAT-720 Installation (Previous model shown)
2. Level device in mounting area with label facing down so that that battery access panel is on the left.
3. Mark all four (4) mounting holes with scratch awl.
4. Drill all four (4) mounting holes.
MBUD-0266v1.3 Page 27