Install guide

CalAmp | LenderOutlook Device Install Guide
1 REGULATORY INFORMATION
1.1 HUMAN EXPOSURE COMPLIANCE STATEMENT
Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications services (PCS)
equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), §
2.1091 and § 2.1093, as appropriate.
CalAmp certifies that it has determined that the LMU-XXX series and CAT-720 comply with the RF hazard
requirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 24,
Subpart E of the FCC Rules and Regulations. This determination is dependent upon installation,
operation and use of the equipment in accordance with all instructions provided.
The LMU-XXX series and CAT-720 are designed for and intended to be used in fixed and mobile
applications. “Fixed” means that the device is physically secured at one location and is not able to be
easily moved to another location. “Mobile” means that the device is designed to be used in other than
fixed locations and generally in such a way that a separation distance of at least 20 cm is normally
maintained between the transmitter’s antenna and the body of the user or nearby persons. The LMU-
XXX series and CAT-720 are not designed for or intended to be used in portable applications (within 20
cm of the body of the user) and such uses are strictly prohibited.
To ensure that the LMU-XXX series and CAT-720 comply with current FCC regulations limiting both
maximum RF output power and human exposure to radio frequency radiation, a separation distance of
at least 20 cm must be maintained between the unit’s antenna and the body of the user and any nearby
persons at all times and in all applications and uses. Additionally, in mobile applications, maximum
antenna gain must not exceed 3 dBi.
MBUD-0266v1.3 Page 1