Installation guide

LMU-4200™ Hardware and Installation Guide

V1.0.9 November 13, 2010

- 5 - CalAmp Proprietary & Confidential

1.3.1 Power Connector

The LMU-4200™ uses a 4 pin Molex 43045-0402 connector as its power connection. The

pin out is as follows:

Pin Signal Name Description Input or Output

1 VIN Power Power / Input

2 GND Ground Ground

3 INPUT 0 Input 0 / Ignition Sense –

Digital Input

Input

4 ADC1 Analog to Digital Input 1 Input

Figure 2 - LMU-4200™ Header (looking into LMU)

CalAmp offers a fused, 4-wire, 8 foot harness that mates to this connector (Part Number

5C888)