Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 101 - CalAmp Proprietary & Confidential
AT$APP Param 2304,0,<User Value>
To program in a phone number, you would use:
AT$APP PARAM 2305,0,<phone number>
Both the user defined Mobile ID and phone number fields must be all digits. That is, they
cannot contain spaces, brackets or dashes.
The default setting is to have the ESN as the Mobile ID.
13.2
The firmware version of an LMU is broken into two parts, an application ID and the actual
firmware revision. The application ID is a 3 digit value that indicates the type of LMU (8-Bit
products (MTU-100™, LMU-900™, LMU-1100™, LMU-1200™LMU-1000™, LMU-
2500™ or LMU-4100™) and what technology is in use (GSM, CDMA or iDEN). The
firmware revision is made up of a major version, a minor version and a release version. The
major and minor versions range from 0 to 9 where the release version ranges from a thru z.
the firmware revision has the format of X.Yz where X is the major version, Y is the minor
version and z is the release version.
Firmware Versioning
The firmware version can be read via AT command using:
ATI0
The firmware version is also available in PULS for units that are managed via that system.
13.3
The Configuration Versioning of the LMU is broken into two values, the Script Version and
the Configuration Version. The Script Version is intended to represent a fixed set of features
within a PEG script where the Configuration Version is meant to represent the settings
within that PEG Script. For instance, the Script Version would indicate that the PEG Script
has a speeding detect feature. The Configuration Version would indicate the speed limit of
65MPH.
Configuration Versioning
The Script Version can be accessed using S-Register 121. The Configuration Version is
access using S-Register 143. Please keep in mind that PULS uses these two S-Register as part
of its configuration management features. It is there for unadvisable to change these values
outside of PULS.
There is a user controlled configuration version known as the Vehicle Class. This version
number is controlled by S-Register 147. Users may use this version to represent whatever
they need (for instance a customer ID). This value is displayed within PULS, but it is not
used for any specific purposes.