Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 125 - CalAmp Proprietary & Confidential
Name
ID
Value
Index
Range
Data
Size
(bytes)
Data Description
Accumulator Reporting –
Accumulator Count by Event Code
770
0..7
2
8-bit unsigned int: Number of accumulators to
report for the specified Event Code
8-bit unsigned int: Event Code
Inbound Event Report Contents
772
0..0
4
16-bit mask (which bits to program)
16-bit value bitmapped as follows:
bit 15: spare
bit 14: spare
bit 13 – 9: Number of accumulators to report
(special 5-bit unsigned int):
(0 = 0, 1=4, 2=1, 3=5, 4=2, 5=6, 6=7, 7=(Not
allowed), 8=3, 9=16, 10=17, 11=18, 12=19,
13=20, 14=21, 15=22, 16=23)
bit 8: Zone States
bit 7: extended options (i.e. enable bits 8-15)
bit 6: reserved
bit 5: I/O Status
bit 4: Carrier Info
bit 3: Comm Status (RSSI, Channel, Availability)
bit 2: Pseudo-ranges to Sats
bit 1: obsolete
bit 0: altitude
Logged Event Report Contents
773
0..0
4
Same as Inbound Event Report Contents
Comm Config Parameters
Packet Dial String
2316
0..1
16
0 bytes (ASCII chars) + null byte
Dial strings used to setup a data connection to the
wireless network
GPRS = *99***1#
CDMA = #777
iDen = 0
Packet Dial String – Current Index
2317
0..0
1
8-bit unsigned int
Index of the current Packet Dial String being used
by the LMU.
PRL Dial String
2318
0..0
16
0 bytes (ASCII chars) + null byte
Dial strings used to download any PRL updates
from the wireless network
Modem Password (CDMA SPC)
1284
0..0
4
32-bit unsigned int
SPC for a CDMA modem. The SPC is typically a
6 digit decimal value.
Event Record
512
0..149
8
8-bit unsigned int (Trigger Code)
8-bit unsigned int (Trigger Modifier)
8-bit unsigned int (Condition Code)
8-bit unsigned int (Condition Modifier)
8-bit unsigned int (Action Code)
8-bit unsigned int (Action Modifier)
8-bit unsigned int (Condition Code – 2)
8-bit unsigned int (Condition Modifier – 2)
GPRS Context String
2306
0..1
64
63 bytes (ASCII chars) + null byte
LMU-1000: 30 bytes (ASCII Chars) + null byte
GPRS Service and Context settings.