Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 127 - CalAmp Proprietary & Confidential
Name
ID
Value
Index
Range
Data
Size
(bytes)
Data Description
bit 0 – Append Checksum to messages
LMU TAIP Listening Port
2051
0..0
2
16-bit unsigned int
UDP Port Number the LMU will listen on for
incoming TAIP Messages
TAIP Message Selection
2049
0..0
2
8-bit mask (which bits to program)
8-bit value bitmapped as follows:
bit 7: Enable Accumulator Reporting
bit 6: Send received SMS messages to TAIP IP
and Port
bit 5: spare
bit 4: spare
bit 3: spare
bit 2: Send IO messages
bit 1: Send LN messages
bit 0: Send PV messages
TAIP Remote IP Address
2052
0..0
4
32-bit unsigned int
IP Address the LMU will send TAIP Messages to.
TAIP Remote Port
2053
0..0
2
16-bit unsigned int
UDP Port number the LMU will send
TAIP messages to.
TAIP Vehicle ID
2050
0..3
1
1 byte (ASCII char)
Only digits allowed
Index 0 – Most Significant Digit
Index 3 – Least Significant Digit
PEG Parameters
Acceleration Sample Count
278
0..3
1
8-bit unsigned int
Acceleration Threshold
277
0..3
4
32-bit signed int (2’s Compliment)
Accumulator Threshold
266
0..15
4
32-bit unsigned int
A/D Threshold
276
0..3
2
16-bit unsigned int
Day of Week
269
0..3
2
8-bit mask (which bits to program)
8-bit value bitmapped as follows:
bit 7: spare
bit 6: Saturday
bit 5: Friday
bit 4: Thursday
bit 3: Wednesday
bit 2: Tuesday
bit 1: Monday
bit 0: Sunday
Environment Mask
273
0..7
8
32-bit mask (which bits to program)
32-bit value bitmapped as follows:
bit 31: Enable In Motion
bit 30: Enable Log Active
bit 29: Enable Comm Acquired
bit 28: Enable GPS Acquired
bit 27: Enable Input 3
bit 26: Enable Input 2
bit 25: Enable Input 1
bit 24: Enable Input 0
bit 23: Enable Day-of-Week 3
bit 22: Enable Day-of-Week 2