Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 138 - CalAmp Proprietary & Confidential
Register
Description
8-Bit
LMU-1000™
LMU-2500™
LMU-4100™
124
Debug Enables
Description:
This S-Register sets the debug levels used by the
LMU. All debug messages are sent to the host port.
This S-Register should only be used when directed by
CalAmp personnel.
Settings:
Bit 0 – Status Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 1 – MDT Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 2 – PCCMD Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 3 – Power Management Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 4 – Message(hex) dump Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 5 – PGMCYCLE Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 6 – Comm Status Debug
- Set = Enabled Debug Messaging
- Cleared = Disabled Debug Messaging
Bit 7 – TDTEST Debug
- Set = Enables the creation of an Event Report
on every Time-Distance Update. The Event
Code will increment with every Message
- Cleared = Disables Time Distance Test Debug
-
X