Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 140 - CalAmp Proprietary & Confidential
Register
Description
8-Bit
LMU-1000™
LMU-2500™
LMU-4100™
126
GPS Debug Enables
Description:
This S-Register sets debug messaging levels used by
the LMU in regards to GPS. All debug messages are
sent to the host port. This S-Register should only be
used when directed by CalAmp personnel.
Settings:
Bit 0 – Odometer (Odo) Message
- Set = Enables the Odometer GPS Debug
Messaging
- Cleared = Disables the Odometer Debug
Messaging
Bit 1 – Position Update (Pos) Message
- Set = Enables the Position Update GPS Debug
Messaging
- Cleared = Disables the Position Update Debug
Messaging
Bit 2 – GPS Debug
- Set = Enables GPS Debug Messaging
- Cleared = Disables GPS Debug Messaging
Bit 3 – Route Serial Port Handler Debug out GPS
Port
- Set = Route Serial Port Handler Debug out GPS
Port
- Cleared = Does not route Serial Port Handler
Debug out GPS Port
Bit 4 – Real-Time Updates
- Set = Causes an Unacknowledged Event Report
to be sent with every real-time GPS Update
- Cleared = Event Reports are not sent with every
real-time GPS update
X