Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 143 - CalAmp Proprietary & Confidential
Register
Description
8-Bit
LMU-1000™
LMU-2500™
LMU-4100™
132
Serial Port Word Definition (Parity, Stop Bits, Word Size)
Description:
This S-Register will set the LMU’s Host Port word
definition while not in Standard mode
Settings:
Bit 0 – Bit 1 – Word Size
0 = 5 bits
1 = 6 bits
2 = 7 bits
3 = 8 bits
Bit 2 – Stop Bits
- Set = 2 Stop Bits
- Cleared = 1 Stop Bit
Bit 3 – Parity
- Set = Parity Enabled
- Cleared = No Parity
Bit 4 – Parity Type
- Set = Even Parity
- Cleared = Odd Parity
X
133
Serial Port Misc. Controls
Description:
This S-Register will set the LMU’s Host Port
behavior while not in Standard mode
Settings:
Bit 2 - Termination Character
- Set = Enables the use of the termination
character for User Message creation
- Cleared = Disables the use of the termination
character for User Message creation
X
134
GSD(User) Message Termination Character
Description:
This S-Register will set the Termination Character to
be used to end a user message
Settings:
Decimal value of the ASCII Character ranging from
0 -255.
X
135
GSD(User) Message Termination Length
Description:
This S-Register controls the maximum length of a
User Message.
Settings:
The size of the user message ranging from 4 to 804
bytes. The S-register has an LSB of 4 bytes, so it will
range from 0(4bytes) to 201 (804 bytes).
X