Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 147 - CalAmp Proprietary & Confidential
Register
Description
8-Bit
LMU-1000™
LMU-2500™
LMU-4100™
141
GSD (User) Serial Port Message Count Limit
Description:
This S-Register counts the number of messages
received on a serial port based on the Termination
Character/Message Length/Etc… When the
message count reaches the value of the S-Register, a
User Message is created based on the last message
received.
Settings:
The number of messages to ignore before creating a
user message ranging from 0 – 127 messages.
Bit 7 – Scaling
- Set = the count is scaled by a factor of 100 (100-
12700)
- Cleared = The count is scaled by a factor of 1
(1-127)
X
142
Horizontal Position Accuracy Threshold
Description:
This value is used to help control the position used
while the LMU is ‘pinning’. The GPS accuracy
estimate must be lower than this value for the LMU’s
position value to be updated.
Settings:
The accuracy limit to use, ranging from 1 to 255
meters. 0 Will disable this feature.
X X X X
143
Configuration Version
Description:
This S-Register is reserved for use by the customer to
Identify the Configuration Version seen in PULS.
Users are advised not to change this setting locally. It
should only be changed through PULS.
Settings:
Values can range from 0-255.
X X X X
144
GPS Restart Timer
Description:
This is the length of time the LMU will wait before
restarting the GPS receive if it does not have a valid
GPS position.
Settings:
The amount of time to wait ranging from 0 to 255
minutes.
.
X X X X