Installation guide

LMU Users Guide
V1.0.6 December 10 2009
Copyright ©CalAmp DataCom Inc 2009
- 151 - CalAmp Proprietary & Confidential
Register
Description
8-Bit
LMU-1000™
LMU-2500™
LMU-4100™
153
Polling Interval
Description:
This is how often the LMU will poll the modem for
network status information. The poll will only occur
while the LMU is not attempting to transmit data.
Settings:
The number of seconds to wait between polls
ranging from 1 to 255 seconds. 0 disables this
feature.
X X
154
KMIP and Connection Monitor Control Register
Description:
This S-Register controls the advanced KMIP settings
and Connection Monitor Settings of the LMU.
Settings:
Bit 0 – KMIP Out of Data Call Disable
- Set = Do not collect KMIP data when the data
session is idle
- Cleared = Allow KMIP data collection when the
data session is idle
Bit 1 = KMIP Mode Change Delay
- Set = Enables a 2s delay when switching
between KMIP and Data ports (required for
early CDMA devices)
- Cleared = No delay when switching between
KMIP and Data ports
Bit 2 = Connection Monitoring Send Enable (Does
not apply to CDMA devices)
- Set = Enables Connection Monitoring (LCP
echo)activation when sending a packet
- Cleared = Disables Connection Monitoring
activation when sending a packet
Bit 3 = Connection Monitoring Disable
- Set = Disables Connection Monitoring
- Cleared = Enables Connection Monitoring
X X
155
GSM Auto Provisioning Enable / Disable
Description:
This S-Register will control if the LMU will
automatically populate APN, Username and
Password settings when a new operator ID is
detected..
Settings:
Bit 0 – Auto Provisioning
- Set =Disables automatic provisioning of APN,
Username and Password
- Cleared = Enables auto-provisioning
X X X