Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 164 - CalAmp Proprietary & Confidential

The wizard should now close and a cursor should appear in the main HyperTerminal

window. It is a good idea to verify that communications are established with the LMU. This

can be done by issuing the following AT Command:

ATI0

A response similar to the following should appear:

APP:LMU,001 V8.0b (Sep 26 2007 18:10:32)

PIC:TIM S/N 4130000200

GPS:UBLOX-00040001 -5.00 Jan 09 2006 12:00:00

Radio:SIEMENS TC65-REVISION 02.000

If another response appears it is a good chance that HyperTerminal is connected to the

wrong Com Port. The com port setting can be changed by the following sequence.

Click the Call menu then select Disconnect.

From the File menu click Properties.

The Com Port can be changed by altering the Connect Using entry and clicking OK.

To reconnect HyperTerminal to the LMU select Call from the Call menu.