Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 169 - CalAmp Proprietary & Confidential

To pair the LMU-4100™ using a BTA with a Windows Mobile device you would perform

the following steps:

Appendix F - Pairing to the LMU-4100 Using

Windows Mobile

1. Go to Start -> Settings and click the Connections tab.

2. Tap the Bluetooth icon.

3. In the Mode tab, check both the Turn on Bluetooth and Make this device discoverable to

other devices options.

4. Under devices, delete any existing connections

5. Tap New Partnership...

6. Select LMU xx.xx.xx from the list that appears. (If a list doesn't appear, hit

Refresh)

7. Tap Next

8. Enter the LMU's passkey (likely '0000') and tap Next

9. When you're asked to connect to the LMU, tap Yes

10. Re-enter the passkey if needed

11. Select Serial Port from the Select services to use from this device

12. Tap Finish

13. Tap the COM Ports tab.

14. Tap New Outgoing Port

15. Select the LMU from the devices list and tap Next

16. Select the COM port you wish to use. (For example I'm using COM0)

17. Un-check the Secure Connection option

This will prevent you from having to rebuild most of this connection the next time you want to pair to the

same BTA.