Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 183 - CalAmp Proprietary & Confidential

Adding a modem into Windows Mobile devices is a little trickier than for a laptop based

operating system. Specifically you will need to make an adjustment to the Registry of your

Windows Mobile device. You will need to make the following additions:

Windows Mobile 5.0

[HKEY_LOCAL_MACHINE\ExtModems\CalAmpLMU]

"Port"="COM0:"

"FriendlyName"="CalAmp LMU"

"DeviceType"=dword:00000001

[HKEY_LOCAL_MACHINE\ExtModems\CalAmpLMU\Settings]

[HKEY_LOCAL_MACHINE\ExtModems\CalAmpLMU\Init]

Note that the ‘Port’ key must match the COM port the LMU is connected to. If the com

port is using the sync cable, it is likely COM1. For Bluetooth devices, it must match the

Outgoing COM Port associated with the LMU-4100™’s BTA.