Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 30 - CalAmp Proprietary & Confidential

To re-enable KMIP polling you would use:

ATS153=10

KMIP Polling is described in detail later in this document.

5.1.3.3 Bypass Mode

Bypass mode, in reference to Dial-Up Networking applies to just the CDMA LMU-4100™.

In this mode, the LMU switches itself out of the data path and allows the host laptop or

PDA to establish the Dial-Up Networking session directly with the CDMA modem. This

occurs automatically when the Host Port BAUD rate and the Modem Port BAUD rate are

set to the same value. The Host Port BAUD rate is controlled by S-148 and the Modem Port

BAUD rate is controlled by S-146.