Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 74 - CalAmp Proprietary & Confidential

10.2.4.4 Fixed Inbound Address Index

When in Fixed Inbound Address mode, the LMU-2500 or LMU-4100 will not change its

Inbound IP address based on a send failure. To enable this mode, Bit 6 of Parameter 1280

must be set. The only time the inbound address will change is on a Comm Select PEG

Action.

AT$APP PARAM 1280,0,64,64

Please note that the Fixed Inbound setting will over-ride the Dynamic, Static and Random

Inbound modes.

This mode is not supported on the MTU-100, LMU-900, LMU-1000, LMU-1100 and LMU-

1200.