Installation guide

LMU Users Guide

V1.0.6 December 10 2009

- 80 - CalAmp Proprietary & Confidential

• <inputs> (1 byte)

The current state of the inputs, bit mapped as follows:

Bit 0 – Ignition

Bit 1 – Input 1

Bit 2 – Input 2

Bit 3 – Input 3

Bit 4 – input 4

Bit 5 – Input 5

Bit 6 – input 6

Bit 7 – Input 7

• <unit status> (1 byte)

Status of key modules within the unit.

Bit 0 – Not Used

Bit 1 – GPS Antenna Status (0=OK, 1=Error)

Bit 2 – GPS Receiver Self-Test (0=OK, 1=Error)

Bit 3 – GPS Receiver Tracking (0=Yes, 1=No)

Bit 4 – Not Used

Bit 5 – Config Error (0 = No ,1 = Yes)

Bit 6 – GPS Receiver Exception (0 = OK, 1 = Error)

Bit 7 – Not Used

• <event index> (1 byte)

The index number of the event that generated the report. A value of 255 represents a

Real Time PEG Action request.

• <event code> (1 byte)

The event code assigned to the report as specified by the creating event’s Action

Modifier.

• <accums> (1 byte)

The number of accumulators being reported with the event report. A maximum of 4

accumulators can be included

• <list of accumulators> (4 bytes for each entry)

A list of from 1 to 4 accumulators being reported with the event report.