User's Manual

16
3. USING CRICkETLINk
About the Wireless Networks View
CricketLink will open the Broadband Net-
works window by default. This view is where
you manage your Broadband connections.
The Broadband Networks window displays
all currently available network connections.
At a glance you can see the signal
strength .
Your current connection state and the
elapsed time of the connection are
displayed along the bottom of the status bar.
Connecting
Once your device is properly configured,
connecting to the Internet is as simple
as selecting the network connection type
shown in the list and clicking the “Connect”
button.
1. Select Data Connection.
2. Click the “Connect” button when it
becomes enabled.
Once connected, the “Connect” button will
change to “Disconnect”.
Simply click this to end your current con-
nection. To connect to any other network
shown, select it, and then select “Connect”.
The Status Bar
Information regarding your current network
connection can be seen in the status bar
along the bottom of CricketLink interface.