Instructions / Assembly

Installation / Assembly

Fire Pit Owner’s Manual

LTR50001010, Rev. M

Liquid Propane

Your Cal Flame replace or re pit is not

provided with a propane cylinder. If you

choose to operate your replace with pro-

pane, you must supply your own cylinder.

Requirements

The 20 lb propane gas supply cylinder

used with propane models must be con-

structed and marked in accordance with

the specications for propane gas cylinders as required by the U.S.

Department of Transportation (DOT) or the CAN/CSA B339, Cylinders,

Spheres and Tubes for the Transportation of Dangerous Goods.

Manifold Pressure: For plumbed-in liquid propane installation, use

a regulator.

Supply Pressure: Maximum line pressure for plumbed-in propane is

14” W.C psi (3.5 kPa). Minimum line pressure for propane is 11” W.C.

Pressure Regulator: The unit must be used with the supplied gas

pressure regulator and hose assembly. The regulator will control and

maintain a uniform gas pressure in the manifold. The burner orice has

been sized for the gas pressure delivered by the regulator. Replace-

ment pressure regulator and hose assemblies must be those specied

in this manual.

Cylinder Specication: Any propane gas supply cylinder used with

this replace or re pit must be approximately 12 inches in diame-

ter and 18 inches high. The maximum fuel capacity is 20 lbs. of pro-

pane, or 5 gallons. Full cylinder weight should be approximately 38

lbs. (43.7 lbs. nominal water capacity.) Always use the cylinder dust

cap on the cylinder valve outlet during transport and when the cyl-

inder is not connected to the replace or re pit. The 20 lb propane

gas cylinder used must include a collar to protect the cylinder valve.

Filler Valve: If you do not have an updated ller valve on your exist-

ing propane tank, you will need to purchase one at your local hardware

store, as you will not be allowed to rell the tank at any lling station.

Transporting Gas Cylinder: Only one cylinder should be transported

at a time. Transport cylinder in an upright and secure manner with

control valve turned off and the dust cap in place.