Use and Care Manual

14
Installation / Assembly
Fireplace Owner’s Manual
LTR50001006, Rev. Q
www
4.
black sparker wires into the
gap in the hearth base.
6. Connect the black sparker
wires to the valve as shown
below.
5. Reach through the gap in the
open right side and pull the
wires.
7.
burner to the gas valve as
shown below.
8. Push the black gas line (for
(for NG units) under the
Make sure the burner has been
converted for use with NG be-
fore connecting to a NG source!