Use and Care Manual

18
Cleaning and Maintenance
2010 G Series Gas Grills
LTR50001050, Rev. B
www.c a ls p as . co m
Rust Removal
It is a common misconception that stainless steel does not rust. It does
not stain, corrode, or rust as easily as ordinary steel (it stains less),
but it is not stain-proof. If not properly protected and maintained, it
can corrode, pit, and discolor.
Important
Because salt will accelerate rust and corrosion, grill
or barbecue island owners who live near the beach
need to be diligent in maintaining their stainless steel
hardware. You need to clean and polish your stainless
steel frequently, apply a protectant, and ensure water
does not collect and puddle.
Periodically clean exterior stainless steel surfaces with WD-40 or Sheila
Shine and wipe down with a dry cloth or paper towel until surface is
free of rust. If there is signicant rust or corrosion, use a Scotch-Brite
scrubber.
Both of these products will act as a surface protectant and help resist
smudges, stains, and rust.
Caution
Although nitric acid (also called aqua fortis) can be effective
for rust removal, it is a highly corrosive chemical. Because
of the potential for injury or damage to your stainless
steel, we do not recommend using nitric acid.
Cleaning the Interior of Your Grill
Thoroughly clean stains, food, and grime using a sponge or damp 1.
cloth with warm water and a mild dish soap. Use Fantastik or
Formula 409 to remove heavier soil.
Thoroughly rinse all surfaces and dry them completely with a clean 2.
towel. Do not allow water to accumulate and puddle on stainless
steel. Water from various sources such as garden hoses contains
iron which will give the appearance of rusting on stainless steel. If
allowed to stand for long periods of time on stainless steel, it will
cause pitting.
The racks, ame tamers, and avor bars can all be removed for 3.
cleaning and are dishwasher safe.