Specifications

Appendix
29
Power Burner
LTR50001100, Rev. B
www. c a l  a me bb q. co m
Apply a small amount of pipe compound to the ori ce threads.4.
Screw in the ori ce until it is  nger tight.5.
Tighten the ori ce with the 6mm wrench.6.
Repeat the above steps for the remaining burners.7.
Replace the burners and the grate.8.
Mark the rating plate
After conversion has been completed, mark the rating plate as NG with
an indelible marker.
Orifi ce sizes
Inner burner Outer burner
NG 1.93 mm 2.44 mm
LP 1.18 mm 1.54 mm