Specifications

P4 and P5 Barbecue Grills

LTR50001137, Rev. B

Appendix

www. ca l a me b bq . c o m

All Cal Flame grills are manufactured as standard liquid propane (LP) grills and can be converted to burn

natural gas (NG). There are two steps required to convert a grill from LP to NG.

You must perform both steps.

Step 1: Switching the regulator behind the grill

Step 2: Changing the burner oriﬁ ces

The conversion kit provided with

your grill may include some or

all of the parts shown at right,

depending on the size and model

of your grill.

The kit contains ori ces to convert

main burners, rear infrared

burners, and the large infrared

burner. Your kit will have only the

parts you need to convert your

grill.

Before you begin, make certain

the LP gas source has been

disconnected from the grill.

To gain access to the NG regulator,

tilt the grill forward.

Step 1: Attaching the regulator behind the grill

Remove the LP gas line and LP gas  tting from end of manifold.1.

Attach NG regulator to end of manifold.2.

Converting from LP to NG

WARNING! You must have an authorized service technician perform this

procedure. If these instructions are not followed exactly, a ﬁ re or explosion may

result causing property damage, personal injury or loss of life. Lloyd’s Material Supply

(LMS) will not be held responsible for an improperly converted gas grill.

You will need:

Pipe wrench•

Pipe compound suitable for •

natural gas