Owner`s manual

. A complete Parts List is available at www.MillerWelds.com

OM-253 392 Page 18

5-2. TIG Welding Connections DCEN (Direct Current Electrode Negative)

Ref. 254 251-B / Ref. 254 249-A / Ref. 254 247-B

! Turn off unit and disconnect

input power before making

connections.

1 Positive Weld Output

Receptacle

2 Negative Weld Output

Receptacle

3 TIG Torch And Cable

4 Work Clamp And Cable

Connect TIG torch cable to the

negative weld output receptacle

and connect work clamp to positive

weld output receptacle.

Ensure all connections are tight.

5 Foot Control

6 Finger Tip Control

7 Remote Control Cable

8 Six Pin Remote Control

Receptacle

Route control cable through MIG

gun hole.

Connect foot control or finger tip

control to six pin remote control

receptacle.

9 TIG Shielding Gas

Connection

Use Argon gas for TIG welding (see

Section 5-6).