Owner`s manual

. A complete Parts List is available at www.MillerWelds.com
OM-253 392 Page 26
5-12. Installing Wire Spool And Adjusting Hub Tension
1 Wire Spool
2 Retaining Nut [For 8 in. (203
mm) Spool Only]
2
1
When a slight force is needed
to turn spool, tension is set.
1/2 in.
Tools Needed:
Ref. 254 253-A / 803 012 / 803 013 -B / Ref. 802 444-C
Installing 8 in. (203 mm) Wire Spool
Installing 4 in. (102 mm) Wire Spool
When a slight force is needed
to turn spool, tension is set.
Retaining ring used with 8 in.
(203 mm) spool only.
Adapter used with 8 in.
(203 mm) spool only.
Align locking hole in
spool with locking
pin on spool hub.