Owner`s manual

. A complete Parts List is available at www.MillerWelds.com
OM-253 392 Page 34
6-10. Viewing Process Logs
1 Material Thickness Plus (+)
Button
2 Process Select Knob
Follow instructions in Section 6-3 to
enter the setup menu.
Press Material Thickness Plus (+)
button six times after entering setup
to enter the Process Logs screen.
Process Logs screen displays
manual minutes, Auto-Set minutes,
weld cycles, and Auto-Set cycles
for the selected process.
To view other processes, use the
Process Select knob to select the
desired weld process.
Cycle through menu items using
the Material Thickness Plus (+) but-
ton or cycle unit power to save set-
tings and exit menu.
Ref. 249 632-E
ON/OFF
MATERIAL THICKNESS
AUTO−SET
WIRE/ROD/TUNGSTEN
ELECTRODE HOT
STICK
FLUX
CORED
SELF
SHIELDED
MIG
STAINLESS
MIG
STEEL
C25
MIG
STEEL
C100
MIG
ALUMINUM
TIG
LIFT-ARCt
REMOTE
TIG
LIFT-ARCt
ADJUST ADJUST
2
1