Owner`s manual

OM-253 392 Page 62
SECTION 13 − PARTS LIST
13-1. Recommended Spare Parts
QuantityDescription
Part
No.
Item
No.
235570 Q−150 MIG gun (Includes) 1..................... .. ......................................
43015 Liner, 2/300A .023−.030 15 ft 1....................... .... ..................................
QJL−2330 Liner, Jump Steel .023−030 1................... .... ...................................
4323R Insulator, Nozzle (small) 1...................... .... .......................................
DS−1 Diffuser, Centerfire (small nozzle) 1....................... .... ..............................
T−030 Tip, Centerfire .030...................... ....
NS−1200B Nozzle, Centerfire Small Brass 1/2 in. Flush 1.................. .... .....................
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
13-2. Drive Rolls
PART NO. WIRE DIAMETER INCHES (mm)
220 179 .024 (.6) and .030/.035 (.8 and .9) (Standard)
202 926 .030/.035 (.8 and .9) and .045 (1.2 VK Groove)
13-3. Options
PART NO. DESCRIPTION REMARKS
43110 Liner, 2/300A .035−.045 in. wire size, 10 ft length
QJL−3545 Liner, Jump Steel .035−.045 in. wire size
T−023 Tip, Centerfire .023 in.
T−035 Tip, Centerfire .035 in.
T−045 Tip, Centerfire .045 in.
NS−5818C Nozzle, Centerfire Small Copper 5/8 in. Recess 1/8 in.
NS−5800B Nozzle, Centerfire Small Brass 5/8 in. Flush
NS−5818B Nozzle, Centerfire Small Brass 5/8 in. Recess 1/8 in.
NS−1218C Nozzle, Centerfire Small Copper 1/2 in. Recess 1/8 in.
NS−1218B Nozzle, Centerfire Small Brass 1/2 in. Recess 1/8 in.
A complete Parts List is available on-line at www.MillerWelds.com