Operating instructions

ııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııııı
www.fptgroup.com
Neo
Installation & Operating Instructions
Page 20
5. Managing the Keypad
The drive is configured and its operation monitored via the keypad and display
5.1 Keypad Layout and Function - Standard LED Keypad
NAVIGATE
Used to display real-time
information, to access and
exit parameter edit mode and
to store parameter changes
UP
Used to increase speed in
real-time mode or to increase
parameter values in
parameter edit mode
DOWN
Used to decrease speed in
real-time mode or to
decrease parameter values in
parameter edit mode
RESET/
STOP
Used to reset a tripped drive.
When in keypad mode is
used to Stop a running drive
START
When in keypad mode, used
to Start a stopped drive or to
reverse the direction of
rotation if bidirectional keypad
mode is enabled.
5.2 Changing Parameters
Procedure Display Shows
Power on drive
stop
Press and hold the for >2 seconds
P1-01
Press the key
P1-02
The and can be used to select the desired parameter
P1-03
Select the required parameter, e.g. P1-02
p1-02
Press the button
0.0
Use the and keys to adjust the value, e.g. set to 10
10.0
Press the key
p1-02
The parameter value is now adjusted and automatically stored. Press the key for >2
seconds to return to operating mode
stop
etc...