Hardware manual

64
FUJITSU SEMICONDUCTOR CONFIDENTIAL
MB96630 Series
DS704-00012-1v0-E
Page Section Change Results
19
USER ROM MEMORY MAP
FOR FLASH DEVICES
Changed the annotation
Others (from DF:0200
H
to DF:1FFF
H
) are all mirror area of
SAS-512B.
→
Others (from DF:0200
H
to DF:1FFF
H
) is mirror area of
SAS-512B.
21
INTERRUPT VECTOR
TABLE
Changed the Description of CALLV0 to CALLV7
Reserved
→
CALLV instruction
Changed the Description of RESET
Reserved
→
Reset vector
Changed the Description of INT9
Reserved
→
INT9 instruction
Changed the Description of EXCEPTION
Reserved
→
Undefined instruction execution
22
Changed the Vector name of Vector number 64
PPGRLT
→
RLT6
Changed the Description of Vector number 64
Reload Timer 6 can be used as PPG clock source
→
Reload Timer 6
25 to 28
HANDLING PRECAUTIONS
Added a section
30
HANDLING DEVICES
Added the description to “3. External clock usage”
(3) Opposite phase external clock
Changed the description in “7. Turn on sequence of power
supply to A/D converter and analog inputs”
In this case, the voltage must not exceed AVRH or AV
CC
→
In this case, AVRH must not exceed AV
CC
. Input voltage for
ports shared with analog input ports also must not exceed
AV
CC
31 Added the description “12. Mode Pin (MD)”
33
ELECTRICAL
CHARACTERISTICS
1. Absolute Maximum Ratings
Changed the annotation *4
Note that if the +B input is applied during power-on, the
power supply is provided from the pins and the resulting
supply voltage may not be sufficient to operate the Power reset
(except devices with persistent low voltage reset in internal
vector mode).
→
Note that if the +B input is applied during power-on, the
power supply is provided from the pins and the resulting
supply voltage may not be sufficient to operate the Power
reset.