Hardware manual

65
FUJITSU SEMICONDUCTOR CONFIDENTIAL
MB96630 Series
DS704-00012-1v0-E
Page Section Change Results
33
1. Absolute Maximum Ratings Added the annotation *4
The DEBUG I/F pin has only a protective diode against V
SS
.
Hence it is only permitted to input a negative clamping current
(4mA). For protection against positive input voltages, use an
external clamping diode which limits the input voltage to
maximum 6.0V.
35
2. Recommended Operating
Conditions
Added the Value and Remarks to “Power supply voltage”
Min: 2.0V
Typ: -
Max: 5.5V
Remarks: Maintains RAM data in stop mode
Changed the Value of “Smoothing capacitor at C pin”
Typ: 1.0µF → 1.0µF to 3.9µF
Max: 1.5µF → 4.7µF
Changed the Remarks of “Smoothing capacitor at C pin”
Deleted “(Target value)”
Added “3.9
µ
F (Allowance within ± 20%)”
36
3. DC Characteristics
(1) Current Rating
Deleted “(Target value)” from Remarks
Added the Symbol to “Power supply current in Run modes”
I
CCRCH
, I
CCRCL
Changed the Conditions of I
CCPLL
, I
CCMAIN
, I
CCSUB
in “Power
supply current in Run modes”
“Flash 0 wait” is added
Changed the Value of “Power supply current in Run modes”
I
CCPLL
Max: 37.5mA → 37mA (T
A
= +105°C)
Max: 39mA → 38.5mA (T
A
= +125°C)
I
CCMAIN
Max: 9mA → 8mA (T
A
= +105°C)
Max: 10.5mA → 9.5mA (T
A
= +125°C)
I
CCSUB
Max: 6mA → 3.3mA (T
A
= +105°C)
Max: 7.5mA → 4.8mA (T
A
= +125°C)
37
Added the Symbol to “Power supply current in Sleep modes”
I
CCSRCH
, I
CCSRCL
Changed the Conditions of I
CCSMAIN
in “Power supply current
in Sleep modes”
“SMCR:LPMSS=0” is added
Changed the Value of “Power supply current in Sleep modes”
I
CCSPLL
Typ: 10mA → 8.5mA (T
A
= +25°C)
Max : 15mA → 14mA (T
A
= +105°C)
Max : 16.5mA → 15.5mA (T
A
= +125°C)
I
CCSMAIN
Max: 7mA → 4.5m A (T
A
= +105°C)
Max : 8.5mA → 6mA (T
A
= +125°C)
I
CCSSUB
Typ: 0.08mA → 0.04m A (T
A
= +25°C)
Max: 4mA → 2.5m A (T
A
= +105°C)
Max : 5.5mA → 4mA (T
A
= +125°C)