Hardware manual

66
FUJITSU SEMICONDUCTOR CONFIDENTIAL
MB96630 Series
DS704-00012-1v0-E
Page Section Change Results
38
3. DC Characteristics
(1) Current Rating
Added the Symbol to “Power supply current in Timer modes”
I
CCTPLL
Changed the Conditions of I
CCTMAIN
, I
CCTRCH
in “Power supply
current in Timer modes”
“SMCR:LPMSS=0” is added
Changed the Value of “Power supply current in Timer modes”
I
CCTMAIN
Max: 355µA → 330µA (T
A
= +25°C)
Max: 1300µA → 1195µA (T
A
= +105°C)
Max: 2310µA → 2165µA (T
A
= +125°C)
I
CCTRCH
Max: 245µA → 215µA (T
A
= +25°C)
Max: 1215µA → 1095µA (T
A
= +105°C)
Max: 2215µA → 2075µA (T
A
= +125°C)
I
CCTRCL
Max: 105µA → 75µA (T
A
= +25°C)
Max: 1010µA → 905µA (T
A
= +105°C)
Max: 2015µA → 1880µA (T
A
= +125°C)
I
CCTSUB
Max: 90µA → 65µA (T
A
= +25°C)
Max: 985µA → 885µA (T
A
= +105°C)
Max: 1990
µ
A → 1850
µ
A (T
A
= +125°C)
39
Changed the Value of “Power supply current in Stop modes”
I
CCH
Max: 90µA → 60µA (T
A
= +25°C)
Max: 985µA → 880µA (T
A
= +105°C)
Max: 1985µA → 1845µA (T
A
= +125°C)
Added the Symbol
I
CCFLASHPD
Changed the Value and condition of “Power supply current for
active Low Voltage detector”
I
CCLVD
Typ: 5µA, Max: 15µA, Remarks: nothing
→
Typ: 5µA, Max: -, Remarks: T
A
= +25°C
Typ: -, Max: 12.5µA, Remarks: T
A
= +125°C
Changed the condition of “Flash Write/Erase current”
I
CCFLASH
Typ: 12.5mA, Max: 20mA, Remarks: nothing
→
Typ: 12.5mA, Max: -, Remarks: T
A
= +25°C
Typ: -, Max: 20mA, Remarks: T
A
= +125°C
Changed the annotation *2
The power supply current is measured with a 4MHz external
clock connected to the Main oscillator and a 32kHz external
clock connected to the Sub oscillator.
→
When Flash is not in Power-down / reset mode, I
CCFLASHPD
must be added to the Power supply current.
The power supply current is measured with a 4MHz external
clock connected to the Main oscillator and a 32kHz external
clock connected to the Sub oscillator. The current for "On Chip
Debugger" part is not included.