Specifications

5
INTRODUCTION
10
Gross Maximum Sight
Model Storage Operating Gauge
Capacity Pressure Protector
(Liter) (PSIG) Color
Cryo-Cyl 80 HP 85 350 orange
Cryo-Cyl 120 LP 120 22 yellow
Cryo-Cyl 180 LP 196 22 yellow
Cryo-Cyl 230 LP 240 22 yellow
Dura-Cyl 160 MP 176 230 blue
Dura-Cyl 160 HP 176 350 orange
Dura-Cyl 180 MP 196 230 blue
Dura-Cyl180 HP 196 350 orange
Dura-Cyl 200 MP 209 230 blue
Dura-Cyl 200 HP 209 350 orange
Dura-Cyl 230 MP 240 230 blue
Dura-Cyl 230 HP 240 350 orange
Dura-Cyl 265 MP 276 230 blue
Dura-Cyl 265 HP 276 350 orange
Dura-Cyl MCR 160 MP 176 230 blue
Dura-Cyl MCR 160 HP 176 350 orange
Dura-Cyl MCR 180 MP 196 230 blue
Dura-Cyl MCR 180 HP 196 350 orange
Dura-Cyl MCR 200 MP 209 230 blue
Dura-Cyl MCR 200 HP 209 350 orange
Dura-Cyl MCR 230 MP 240 230 blue
Dura-Cyl MCR 230 HP 240 350 orange
Dura-Cyl MCR 265 MP 276 230 blue
Dura-Cyl MCR 265 HP 276 350 orange
gauge protector color is an easy way to determine
the pressure rating of a liquid cylinder.
The data plate (Figure G) is permanently attached
to the handling post of the liquid cylinder. The data
plate shows the serial number and pressure rating
for that cylinder. Do not remove or alter the data
plate in any way.
Cylinder Identification
There are twenty-four Dura-Cyl/Cryo-Cyl Series liquid
cylinders described in this manual. They vary in size,
capacity, pressure, gas service and various plumb-
ing features. It is important that these liquid cylinders
can be easily identified.
The following table shows each model by name and
indicates its capacity and pressure rating. The sight
Figure G