Specifications
13
OPERATION OF CRYO-CYL 80 HP
49
General
This section of the manual deals with the Cryo-Cyl
8
0HP liquid cylinder. The Cryo-Cyl 80 HP is designed
to transport and store liquid oxygen, nitrogen, argon,
carbon dioxide or nitrous oxide and provide it as a gas.
It is a smaller version of the liquid cylinder that is designed
to supply gas at lower flow rates than the regular liquid
cylinders. The Cryo-Cyl 80 HP can provide gas at
pressures up to 350 psi (24.1 BAR). The Cryo-Cyl 80 HP
will build and maintain an operating pressure at the
pressure building regulator setting of 125 psi (8.6 BAR).
If the operating pressure exceeds 125 psi (8.6 BAR),
t
he pressure will be lowered as the gas is delivered. A
separate economizer regulator is not provided on the
Cryo-Cyl 80 HP. A continuous gas flow can be auto-
matically provided from this cylinder.
Liquid can be withdrawn from the Cryo-Cyl 80 HP in
the same manner that was described in section 8.0
Cryo-Cyl LP.
0RESSURE"UILDING6ALVE
'AS5SE6ENT6ALVE
,IQUID&ILL6ALVE