Specifications

59
16
SERVICE AND MAINTENANCE
ITEM PART NO. PART NAME
1
10537961 Dura-Cyl 160 MP & MCR
1 10537987 Dura-Cyl 180 MP & MCR
1 10538007 Dura-Cyl 200 MP & MCR
1 10538023 Dura-Cyl 230 MP & MCR
1 10538040 Dura-Cyl 265 MP & MCR
1 10537979 Dura-Cyl 160 HP & MCR
1 10537995 Dura-Cyl 180 HP & MCR
1 10538015 Dura-Cyl 200 HP & MCR
1 10538031 Dura-Cyl 230 HP & MCR
1 10538058 Dura-Cyl 265 HP & MCR
1 10662770 Cryo-Cyl 80 HP
1 10662884 Cryo-Cyl 120 LP
1 10662892 Cryo-Cyl 180 LP
1 10662913 Cryo-Cyl 230 LP
1 10650357 Laser- Cyl 200
2
10580264 Argon
2 10580272 Oxygen
2 10580281 Nitrogen
2 10591140 Carbon Dioxide
2 10591131 Nitrous Oxide
4 N/R
(
See Liquid Level Gauge
Decals/Heads
)(pg 63)
5 N/R (See DOT/TC Data Plate)
6 3811599 Valve Tag – Gas Use
6 3811589 Valve Tag – Liquid
6 3811609 Valve Tag – Vent
6 3815029 Valve Tag – Vent/Gas Use







$URA#YL3ERIES
#RYO#YL3ERIES
%
&


,)15)$
.)4
2/'%.

Figure Y
Labels and Tags
Fittings And Decals
It is very important that the proper fittings for the spe-
cific gas product being transported are installed on
the liquid cylinder. The Compressed Gas Association
regulates the fitting design so that equipment
compatibility is based on gas product. This keeps
from having a nitrogen tank being attached to a hos-
pitals oxygen supply. DO NOT use fitting adapters.
The proper fittings are shown in the parts lists of sec-
tion 8 through 13 for the different models of liquid
cylinders.
The decals should be placed on the tank as shown
in figure Y. The decal's part numbers are shown with
the illustration. The sight gauge decal for the Cryo-
Cyl LP(shown in Figure DD, page 64) should be
located so that the bottom of the decal lines up with
the ridge on the sight gauge tube. The Dura-Cyl &
Cryo-Cyl 80HP has a unique plastic level gauge
(Figure EE, Page 63) that can be snapped off the
tank and replaced for each gas product. Pull the plas-
tic level gauge straight to the side to remove it. The
new level gauge should be snapped on securely.