Specifications

17
APPLICATIONS AND ACCESSORIES
65
7. Place handwheel (Item 1) over stem and on bon-
net.
8. Install seal (Item 10) over stem into recess of
h
andwheel.
9. Install seal washer (Item 13) over seal at the
bottom of handwheel recess as shown.
10. With the flat side facing downward, place retainer
washer (Item 8) on top of seal.
11. Align the holes of these parts and place spring
(Item 4) over seal.
12. Place spring retainer over assembly as shown,
keeping center hole aligned with parts installed
in steps 6-11.
13. lnstall washer and screw (Items 3 & 14) over
retainer. Tighten firmly with a screwdriver, turn-
ing clockwise.
14. Turn handwheel (Item 1) fully clockwise to close
valve.
15. Pressurize system, check valve for proper oper-
ation and check all seal points for leaks by
inspecting thoroughly.
GENERAL
This section of the Dura-Cyl/Cryo-Cyl Series liquid
cylinder service manual describes the optional acces-
sories that are available from Chart to aid in;
Handling, Filling, Liquid Withdrawal, or Gas Use
Applications.
Handling Carts and Roller Bases
Handling carts are available that will connect to the
liquid cylinder, tip it back and allow it to be rolled to
the desired location. There are two styles of these
carts. Model ULG629-13 has pneumatic tires and
should be used where a rough or uneven floor is en-
countered. Model ULG668-77 operates the same as
the previous model but has hard rubber wheels.
Handling carriages attach to the bottom of the liquid
cylinder and hold it upright. They have a caster or
wheel base and a handle that allows the carriage to
be pulled to the desired location. These types of han-
dling devices should be used on flat, smooth floors.
The handling base chart shows the types of handling
devices available for the various models of Dura-
Cyl/Cryo-Cyl Series liquid cylinders. Note: Some
models of liquid cylinders have a permanently
mounted caster base (see page 44, section 14).
DURA-CYL MCR 180 MP
DURA-CYL MCR 200 MP
DURA-CYL MCR 200 HP
DURA-CYL MCR 160 HP
CRYO-CYL 180 LP
DURA-CYL MCR 160 MP
DURA-CYL MCR 180 HP
CRYO-CYL 80 HP
DURA-CYL 200 HP
DURA-CYL 180 HP
DURA-CYL 200 MP
DURA-CYL 180 MP
DURA-CYL 160 HP
DURA-CYL 160 MP
Harper Cart
ULG 629-51
97-1142-9
Harper Cart
ULG 668-77
97-1141-9
Handling Carriage
xxxxxx xxxxxxx
xxxxxx xxxxxxx
xx xxxxx xxxxxxx