Warranty

Installation / Assembly

Fire Pit Owner’s Manual

LTR50001010, Rev. C

Liquid Propane

Your Cal Flame replace or re pit is not

provided with a propane cylinder. If you

choose to operate your replace with pro-

pane, you must supply your own cylinder.

Requirements

The 20 lb propane gas supply cylinder

used with propane models must be con-

structed and marked in accordance with

the specications for propane gas cylinders as required by the U.S.

Department of Transportation (DOT) or the CAN/CSA B339, Cylinders,

Spheres and Tubes for the Transportation of Dangerous Goods.

Manifold Pressure: For plumbed-in liquid propane installation, use

a regulator.

Supply Pressure: Maximum line pressure for plumbed-in propane is

14” W.C psi (3.5 kPa). Minimum line pressure for propane is 11” W.C.

Pressure Regulator: The unit must be used with the supplied gas

pressure regulator and hose assembly. The regulator will control and

maintain a uniform gas pressure in the manifold. The burner orice has

been sized for the gas pressure delivered by the regulator. Replace-

ment pressure regulator and hose assemblies must be those specied

in this manual.

Cylinder Specication: Any propane gas supply cylinder used with

this replace or re pit must be approximately 12 inches in diameter

and 18 inches high. The maximum fuel capacity is 20 lbs. of propane,

or 5 gallons. Full cylinder weight should be approximately 38 lbs.

(43.7 lbs. nominal water capacity.) Always use the cylinder dust cap

on the cylinder valve outlet during transport and when the cylinder is

not connected to the replace or re pit. The 20 lb propane gas cylin-

der used must include a collar to protect the cylinder valve.

Filler Valve: If you do not have an updated ller valve on your exist-

ing propane tank, you will need to purchase one at your local hardware

store, as you will not be allowed to rell the tank at any lling station.

Transporting Gas Cylinder: Only one cylinder should be transported

at a time. Transport cylinder in an upright and secure manner with

control valve turned off and the dust cap in place.