Use and Care Manual
14
Installation / Assembly
Fireplaces and Firepits
LTR50001006, Rev. B
www.c a l s pa s. c o m
Fire Pit Burner Installation
The log set and crushed lava rock are shipped together on applicable
models. Remove the log set and un-pack all components. The logs are
fragile -- use care when handling.
Turn the re pit on its side. Connect the piezoelectric starter and attach
the ex hose for the gas supply.
Place the re pit back down on its pedestal. Attach the gas ex hose
to the burner.
Note: If you want to convert the orice from LP to NG, this is location
of the orice. See next page for gas converstion instructions.