Technical data

312013 21
Operation
Example 1: Gun Flow Rate Detection (continued)
INFORMER SETUP RECIPE Date: ___________
Informer S/N: ____________
Setup
Parameters
Description Setup
Configuration
A1 Batch Totalizer Units l, cc, gal, oz
A2 Batch Totalizer Target Value
A3 Batch Totalizer Type
t1–Count Up, Auto Reset
t2–Count Down, Auto Reset
t3–Count Up, Manual Reset
t1 t2 t3
B1 Maintenance Totalizer Units
l cc gal oz
B2 Maintenance Totalizer Target
Value
C1 Grand Totalizer Units l cc gal oz
D1 Flow Rate Units l cc gal oz
D2 Flow Rate Maximum Threshold
Values
150
D3 Flow Rate Minimum Threshold
Value
50
E1 K-Factor
F1 Batch Totalizer Alarm Enable 0=No 1=Yes
F2 Diagnostics Alarm Enable 0=No 1=Yes
F3 Flow Rate Enable Alarm 0=No 1=Yes
F4 Maintenance Totalizer Units 0=No 1=Yes
F5 Battery Alarm Enable 0=No 1=Yes
H1 Modbus Node Address
J1 Battery Powered Operation 0=No 1=Yes
Application Description
Manual or automatic gun application detecting mini-
mum flow (tip plugging or low material flow) and high
flow detection (tip wear or excessive flow).
Fig. 8
TI0441A