Technical data

22 312013
Operation
Example 2: Batch Dispense Control (continued)
INFORMER SETUP RECIPE Date: ___________
Informer S/N: ____________
Setup
Parameters
Description Setup
Configuration
A1 Batch Totalizer Units l cc gal oz
A2 Batch Totalizer Target Value
185.0
A3 Batch Totalizer Type
t1–Count Up, Auto Reset
t2–Count Down, Auto Reset
t3–Count Up, Manual Reset
t1 t2 t3
B1 Maintenance Totalizer Units l cc gal oz
B2 Maintenance Totalizer Target
Value
C1 Grand Totalizer Units l cc gal oz
D1 Flow Rate Units l cc gal oz
D2 Flow Rate Maximum Threshold
Values
D3 Flow Rate Minimum Threshold
Value
E1 K-Factor
F1 Batch Totalizer Alarm Enable 0=No 1=Yes
F2 Diagnostics Alarm Enable 0=No 1=Yes
F3 Flow Rate Enable Alarm 0=No 1=Yes
F4 Maintenance Totalizer Units 0=No 1=Yes
F5 Battery Alarm Enable 0=No 1=Yes
H1 Modbus Node Address
J1 Battery Powered Operation 0=No 1=Yes
Application Description
Batch dispense of 185 cc shots for metering PVC.
Fig. 9
TI0442A