Technical data

312013 5
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result
in serious injury.
D This equipment is for professional use only.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D Check the equipment daily. Repair or replace worn or damaged parts immediately.
D Do not exceed the maximum working pressure of the lowest rated system component. This equip-
ment has a 4000 psi (28 MPa, 276 bar) maximum working pressure.
D Use fluids or solvents that are compatible with the equipment wetted parts. See the Technical
Data section of all the equipment manuals. Read the fluid and solvent manufacturer’s warnings.
D Comply with all applicable local, state and national fire, electrical and other safety regulations.
Intrinsic Safety
Intrinsically safe equipment that is installed improperly or connected to non–intrinsically safe equip-
ment will create a a hazardous condition and can cause fire, explosion, or electric shock. Follow local
regulations and the following safety requirements.
D Be sure your installation complies with national, state, and local codes for the installation of an
electrical apparatus in a Class I, Group D, Division I Hazardous Location, including all of the local
safety fire codes, NFPA 33, NEC 500 and 516, and OSHA 1910.107.
D Equipment that comes in contact with the safety barrier’s intrinsically safe terminals must be rated
for Intrinsic Safety. This includes DC voltage meters, ohmmeters, cables, and connections. Re-
move the unit from the hazardous area when troubleshooting.
D The equipment is intrinsically safe when no external electrical components are connected to it, If a
printer, computer, or other electrical component is connected, it must be used in conjunction with a
safety barrier.
D Do not install equipment approved only for non–hazardous location in a hazardous area. See the
ID label for the intrinsic safety rating for your model.
D Do not substitute system components as this may impair intrinsic safety.