Datasheet

Notes
1. Excelitas maintains a tolerance of ± 5% on flux and power measurements.
2. Excelitas maintains a tolerance of ± 2 nm for dominant wavelength measurements.
3. Excelitas maintains a tolerance of ± 1 nm for peak wavelength measurements.
4. Excelitas maintains a tolerance of ± 2 K/W for thermal resistance measurements depending on chip
properties.
5. Due to the special conditions of the manufacturing processes of LEDs, the typical data or calculated
correlations of technical parameters can only reflect statistical figures. These do not necessarily
correspond to the actual parameters of each single product, which could differ from the typical data and
calculated correlations or the typical characteristic line. If requested, e.g. because of technical
improvements, these typ. data will be changed without any further notice.
6. Proper current derating must be observed to maintain junction temperature below the maximum.
7. LEDs are not designed to be driven in reverse bias.
8. All drawings are not to scale.
9. All dimensions are specified in [mm] if not otherwise noticed.
North American Sales Office
Excelitas Technologies
35 Congress Street
Salem, MA 01970, USA
Telephone: [phone]
Toll free: (North America) [phone]
Fax: [phone]
[e-mail]
www.excelitas.com
European Headquarters Asia Headquarters
Excelitas Technologies Excelitas Technologies
Wenzel-Jaksch-Str. 31 47 Ayer Rajah Crescent #06-12
65199 Wiesbaden, Germany Singapore 139947
Telephone: [phone] Telephone: [phone]
Fax: [phone] Fax: [phone]
For a complete listing of our global offices, visit www.excelitas.com
©2011 Excelitas Technologies Corp. All rights reserved. The Excelitas logo and design are registered trademarks of Excelitas Technologies Corp. ACULED®, VHL™, DYO™, and the LED Solutions logo are
trademarks of Excelitas Technologies Corp. or its subsidiaries, in the United States and other countries. All other trademarks not owned by Excelitas Technologies Corp. or its subsidiaries that are depicted herein
are the property of their respective owners. Excelitas reserves the right to change this document at any time without notice and disclaims liability for editorial, pictorial or typographical errors.
600250_01 APP0308
www.excelitas.com Driving the ACULED® VHL™ 29