Use and Care Manual

Barbecue Grills
LTR50001038, Rev. B
Appendix
www. ca l a me b bq . c o m
28
Disconnect or shut off the liquid propane or natu-1.
ral gas line connect to the grill. Wait until the
burners cool down.
Open the hood and remove the grate and ame 2.
tamer on top of the burner you want to replace.
Through the access door underneath the grill, 3.
nd the round stud and locking pin that locks the
burner you want to replace.
Carefully remove the locking pin with your n-4.
gers.
Raise the stud from the locking hole and move 5.
the burner forward carefully to release it from
the ignition and gas supply valve.
Take the burner out of the grill and store it in a 6.
safe and dry place.
Install the burner. Align the gas inlet on the burn-7.
er with the gas supply valve on the grill and torch
tube with ignition. Make sure they align perfectly.
Slide the stud at the other end into the locking
hole.
Adjust the infrared burner. Make sure the burner 8.
is aligned and in position.
Repeat steps 2 through 9 if you want to replace 9.
other burners.
Put back the grate you just removed. (You don’t 10.
need the ame tamer for infrared burners.)
Reconnect or turn on the gas line.11.
If you want to change back to regular burners, just
follow the procedure above in reverse order.
Installing and Replacing Infrared Burners
BTU Ratings
Main burners 15,000 BTU 1.9mm
Infrared burner CF 3 – 5 9,000 BTU #54 DMS
Infrared burner CF 4 12,000 BTU #52 DMS
Side burner 13,000 BTU #50 DMS
Replacement Cover
One cover is used for all grill models and sizes. It can be ordered directly from Cal Flame customer service
or through your dealer. Use part number BBQC2345GB to order this item.