Use and Care Manual

Barbecue Grills
LTR50001038, Rev. B
Built-in Construction
www. ca l a me b bq . c o m
4
Built-in Dimensions
Plan the installation so that the electrical connection,
gas shut-off valve, and pressure regulator are acces-
sible inside the base enclosure. The gas valve shall be
readily accessible for hand operation. A door on the
enclosure to gain access to the gas valve is acceptable,
provided it is non-locking and can be opened without
the use of tools.
The design of the outdoor cooking enclosure must al-
low the LP gas cylinder to be connected and discon-
nected and the connections inspected and tested.
There must be a minimum clearance of 2 inches (51mm)
between the oor of the LP-gas cylinder enclosure and
the ground.
Model Description Width Depth Height
BBQ08873P 3 Burner Grill 23 3/8” 22” 9 ¼”
BBQ08874CP 4 Burner Grill 31” 22” 9 ¼”
BBQ08875CP 5 Burner Grill 38 7/8” 22” 9 ¼”
W
ID
T
H
W
ID
T
H
W
ID
T
H
W
ID
T
H
Minimum
Clearance
12” Minimum Distance
Between Grill and Side Burner
Minimum
Clearance
Screen Vents
W
ID
T
H
W
ID
T
H
WIDTH
DEPTH
WIDTH
WIDTH
DEPTH
WIDTH
WIDTH
WIDTH
DEPTH
DEPTH
DEPTH
HEIGHT
HEIGHT
HEIGHT
Burner
Locking Pin
Burner
Locking Pin
Model Description Width Depth Height
BBQ08954P Deluxe Side by Side Burner 25 ¼” 12 ½” 7 ¼”
BBQ08899P Deluxe Double Side Burner 12 ¼” 22” 7 ¼”
The dimensions shown below are for Cal Flame appliances only.