Service manual

225
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
• Paper Transport / Exit / Entry / Feed Unit Area
Jam Error Codes (J Code) Table
Code Contents Section
J00 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding. (Sheet Bypass)
B
J01 The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller starts rotating. (1st Paper Tray)
J02 The 2nd Paper Tray Path Sensor does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (2nd Paper Tray)
D2
J03 The 3rd Paper Tray Path Sensor does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (3rd Paper Tray)
D3
J04 The 4th Paper Tray Path Sensor does not detect paper within a predetermined time
after the Paper Feed Roller starts rotating. (4th Paper Tray)
D4
J07 The Registration Sensor does not detect paper within a predetermined time after the
2nd Paper Tray Path Sensor is activated. (2nd Paper Tray)
B, D2
J08 The Registration Sensor did not detect paper within a predetermined time after the
3rd Paper Tray Path Sensor is activated. (3rd Paper Tray)
D3
J09 The Registration Sensor did not detect paper within a predetermined time after the
4th Paper Tray Path Sensor is activated. (4th Paper Tray)
D4
J12 The 2nd Paper Tray Path Sensor does not go off within a predetermined time after
the Paper Tray Path Sensor is activated.
B, D2
J13 The 3rd Paper Tray Path Sensor does not go off within a predetermined time after the
Paper Tray Path Sensor is activated.
D3
J14 The 4th Paper Tray Path Sensor does not go off within a predetermined time after the
Paper Tray Path Sensor is activated.
D4
J19 The Registration Sensor does not detect within a predetermined time after the ADU
Sensor is activated.
B
J22 The 2nd Paper Tray Path Sensor detect paper at the time of the initials. B, D2
J23 The 3rd Paper Tray Path Sensor detect paper at the time of the initials. D2, D3
J24 The 4th Paper Tray Path Sensor detect paper at the time of the initials. D3, D4
J30 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Sheet Bypass)
B
J31 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Except Sheet Bypass)
J32 The Registration Sensor does not go off within a predetermined time after the ADU
Sensor is activated. (DP-8020E)
J33 The Registration Sensor detects paper during non-printing mode.
J45 The Paper Exit Sensor keeps detecting paper after a predetermined time, during
non-printing mode.
J46 The Paper Exit Sensor does not go off within a predetermined time after the Sensor is
activated.
J48 The Paper Exit Sensor does not detect paper within a predetermined time after the
Registration Sensor is activated.
J82 The ADU Sensor does not detect paper within a predetermined time after the Duplex
Feed Roller starts rotating.
J85 The ADU Sensor does not go off within a predetermined time after the Sensor is
activated.
J87 The ADU Sensor detects paper during non-printing mode.
J90 Abnormal Paper Jam: During printing the Front Door was opened, etc. B, C, D
J91 A Paper Tray was pulled out while feeding paper. C