Service manual

273
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
F9 Unit
Maintenance
06 RAM
Initialize
00 Parameter Initialize Resets the Fax, and Function
parameters to default values.
Note: Turn the Power Switch to the OFF,
and back to the ON position to enable
the parameter settings.
01 All Job Clear Clears all Jobs stored in Flash Memory.
02 LBP Error Log Clear Clears LBP Error log
03 Shipment Set Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the
Counters (Fax).
04 LBP Fuser Reset Clears the LBP fuser error.
05 Dept. Counter Clear Resets the Counter
06 Flash Memory Clear Clears the Flash Memory Data
07 Firmware
Update
00 Update FROM Card Updates the firmware in the machine
with the Master Firmware Card.
01 Update from USB Updates the firmware in the machine
with the USB.
08 Program
Backup
(Refer to
Sect. 3.7.)
00 Main Onboard F-ROM 4MB
01 Option 1 all Slot 1 FRM8 PCB 8MB
02 Option 1 a Slot 1 FRM8 PCB 4MB (a)
03 Option 1 b Slot 1 FRM8 PCB 4MB (b)
04 Not Used Slot 2 FRM8 PCB 8MB
05 Not Used Slot 2 FRM8 PCB 4MB (a)
06 Not Used Slot 2 FRM8 PCB 4MB (b)
09 Update Program Card Creates a Master Firmware Card using
the Firmware Update Kit. A 4MB, or
8MB Flash Memory Card will be
required depending upon the model.
10 Program
Copy
00 From card to slot 1 Configuration for Program copy.
01 Not Used
02 From slot 1 to card
03 Not Used
04 Not Used
05 Not Used
11 Parameter Backup Backup the Parameter.
12 Parameter Restore Restore the Parameter.
13 Page Memory Size Displays the page memory size (MB).
14 Sort Memory Size Displays the sort memory size (MB).
F9 Mode
Service
Mode
Item Remarks