Service manual

295
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
5.2.6. Fax Service Mode 6 (RAM Initialization)
Initializes RAM, and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Press the “V”, ”/\” arrow keys to select the "6: RAM initialize" on the display.
↓
Press the “SET” key to select the desired Mode number.
↓
Press the "SET" key to initialize RAM.
↓
Press the “STOP” key twice to exit the service mode.
RAM Initialization Table
No. Initialize Mode Description
01 PARAMETER INITIALIZE Restores the Fax, and Function Parameters to default
values.
Note: Turn the Power Switch to the OFF, and back to the
ON position to enable the parameter settings.
02 JOURNAL CLEAR Clears the Journal contents.
03 AUTO DIAL CLEAR Clears the One-touch, ABBR Numbers, and Phone
Books.
04 PROGRAM DIAL CLEAR Clears the Program keys.
05 LOGO/ID/PSWD CLEAR Clears the Logo, ID, Polling Password.
06 LBP ERROR LOG CLEAR Clears the Printer Error Log.
07 SHIPMENT SET Deletes all setting information, except parameter number
80, and 81, then set default values.
08 FLASH MEMORY CLEAR Deletes all information in the Flash Memory.
09 ALL JOB CLEAR Clears all Jobs stored in Flash Memory.